fischer Nail anchor FNA II 6 x 30 M6 x 41 with thread (without nut)

Name: fischer Nail anchor FNA II 6 x 30 M6 x 41 with thread (without nut)
Brand: fischer

Termékváltozat

Download of image data

Top Features

Hammerset installation saves time.
No reinforcement hits due to low anchorage depth This saves time and costs during series installation.
Expansion clip provides a firm hold.
ETA approval for multiple fixings.

Art. N° 095990
FNA S-H
Art. N° 531765
SDS Plus II 6/50/110
Art. N° 549983
Quattric II 6/50/115

The installation-friendly Hammerset anchor with thread (without nut) for multiple fixings.

Advantages

Easy removal of fire protection board without damage.
Reusability of fire protection board.
Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences.
Low anchoring depth (30 mm).
Convenient installation without torque-controlled setting tool.
Approved system that has proven itself one million times over.

The fischer nail anchor FNA II with thread (without nut) is made of zinc-plated steel. The FNA II is set in a time-saving manner in the pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread is suitable for fixing metal clamps for conduits and pipes in internal areas.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems

Az adott esetben elérhető engedélyben szereplő adatok (építőanyagok, terhelések stb.) érvényesek. További dokumentumok itt találhatók: https://www.fischer.de/sdb.

Engedély

ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1

ETA-approval
Anchor length	41 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209441107

fischer Nail anchor FNA II 6 x 30 M6 x 41 with thread (without nut)

Előnyök / Termékismertető

Használat és engedély

Szerelési útmutató

Műszaki adatok

Letölthető dokumentumok