The installation-friendly hammerset anchor for multiple fixings

Nail anchor FNA II M6

Name: Nail anchor FNA II M6
Brand: fischer

The fischer nail anchor FNA II M6 with thread and flange nut is made from zinc-plated, stainless, and highly corrosion-resistant steel. The nail anchor is primarily suitable for the anchoring of ventilation systems and mounting rails. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA II M6 is set in a few hammer blows in a time-saving push-through and pre-positioned installation. Torque-controlled tightening is not required. This saves time. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Product variants

Download of image data

Product variants

Approvals / Test reports

7 Product variant (s)

Anchor length

Drill diameter

Min. drill hole depth for through fixings

Max. fixture thickness

Thread

Width across nut

Legend = Permission Available— = Permission not Available

Viewed 7 of 7 variant (s)

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems

You can find detailed information on building materials in the registration document.

Approvals

ETA-06/0175
DoP No. 0235
2006-CVB-R0559
2006-Efectis-R0560
2006-Efectis-R0561
GS 6.1/21-076-1

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

Created on 03/02/2021

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

Created on 03/16/2021

Test report (fire protection)

pdf, 2006-CVB-R0559

fischer anchors, type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)

Created on 11/01/2006

Test report (fire protection)

pdf, 2006-Efectis-R0560

fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 RVS A4)

Created on 11/01/2006

Test report (fire protection)

pdf, 2006-Efectis-R0561

fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)

Created on 11/01/2006

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

Created on 10/05/2021

Load Table

pdf,

Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

System components

ETA-approval
Anchor length	45 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209441114

ETA-approval
Anchor length	55 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209460221

ETA-approval
Anchor length	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209441091

ETA-approval
Anchor length	51 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M8
Width across nut	13 mm
Packaging	Folding box
Amount	50 St.
GTIN (EAN-Code)	4006209441145

ETA-approval
Anchor length	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	50 St.
GTIN (EAN-Code)	4006209441121

Nail anchor FNA II M6

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

ETA-approval
Anchor length	41 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness	—
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209441107