UltraCut FBS II

The high-performance concrete screw for absolute installation ease.

UltraCut FBS II

Your advantages at a glance

ETA assessment option 1:
The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements.
Zulassung für Mehrfachverankerung von nichttragenden Systemen:
Die Betonschraube ULTRACUT FBS II 6 gvz besitzt die Zulassung für die Mehrfachverankerung von nichttragenden Systemen und ist damit ideal für die Verankerung von Rohrleitungen und Kabeltrassen in Spannbetonhohldecken geeignet.
High flexibility and a precise adaption:
The first concrete screw with diameter 6 mm and variable embedment depths enables high flexibility and a precise adaption on the loads.
Additional safety standards
The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards.
Different head designs:
Different head designs offer a maximum of flexibility and a perfect adaptation to the application
Special features for vertical installation:
Drill holes do not need to be cleaned during vertical installation (ceiling and floor).
Approved adjustment:
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place packing below the base plate head or to align the attached part, and then to tighten the screw again.

Applications

Prestressed hollow concrete ceilings

Perforated tapes

Mounting channels

Flexible anchorage depths

1. Fast installation due to minimum embedment depth e.g. FBS II 6x60/5 US

  • Minimum embedment depth is 40 mm
  • Permissible tensile load at hnom, min 40 mm is 1,2 kN
  • Permissible shear load at hnom, min 40 mm is 4,3 kN

2. Maximum load due to maximum embedment depth e.g. FBS II 6x60/5 US

  • Minimum embedment depth is 55 mm
  • Permissible tensile load at hnom, max 55 mm is 2,4 kN
  • Permissible shear load at hnom, max 55 mm is 6,3 kN



cd-69b7c8f669-4pgmr