fischer Zykon panel anchor FZP II 11x5 M6/T/10 D40

The specialist for thin ceramic façade panels.

Advantages

The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 10 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin ceramic and fine stoneware façade panels. Use in conjunction with clasps systems on façades or with other attachments.

Functioning

Use wet diamond drilling - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Mounting Strip 1 Picture

1 / 4

1
2
3
4

ETA-approval
Anchorage depth ( h_ef )	5 mm
Min. panel thickness	8 mm
Type	Thin panels anchor
Total length ( l )	7,5 mm
Projection length	10 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Material	A4
Material sleeve	Polyamid PA 6
Color	orange
Amount	250 St.
GTIN (EAN-Code)	4048962362077

fischer Zykon panel anchor FZP II 11x5 M6/T/10 D40

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download