Due to the different cladding materials of the modern building envelope, the architecture reveals a new effect from every angle. The residential building consists of two directly adjacent building sections, one of which is clad with corten steel panels on a facade area of 530 m². This weather-resistant structural steel with its unique rust layer combines functional advantages such as durability and low maintenance with industrial charm as well as a warm and at the same time rugged appearance. Furthermore, the facade of the second building section is clad on an area of 1,652 m² with anthracite-colored slate panels in two different thicknesses of 10 mm (1,530 m² area) and 30 mm (95 m² area), which score points with longevity and an elegant look. Additionally, a wooden cladding was installed on 1,500 m² in a typical Scandinavian red tone with a weather-resistant and moisture-repellent coating.    

For the 30 mm thick slate panels, the ATK 100 KL clamp solution is used for fastening instead of the clamps. "Our clients from Erlandsson Bygg AB were convinced by the advantages of our ZeLa holders, which combine increased energy efficiency and sustainability in façade construction through their thermal decoupling and the static advantage of concentric load introduction," says Stefan Schrag, Market Manager of fischer BWM Fassadensysteme GmbH. The controlled sliding range additionally ensures a safe thermal elongation of the supporting profiles. "Furthermore, the façade holders are particularly easy and quick to process," adds Stefan Schrag. "The façade builders from Erlandsson Bygg AB fastened the holders with fischer SXR long-shaft anchors in concrete, clicked in the blade – and that’s it. Due to the high load capacity, the number of holders required is very low, which overall saves a lot of time, costs, and material."