fischer Nail anchor FNA II 6 x 30/30 RB (200pcs.) stainless steel A4

Name: fischer Nail anchor FNA II 6 x 30/30 RB (200pcs.) stainless steel A4
Brand: fischer

Product variants

Download of image data

Top Features

Easy removal of fire protection plates without damage These can be reused.
Secure fixing, even when exposed to vibration, wind, and pushing/pulling effects.
Low anchorage depth saves time and costs.
Simple assembly with hammer or compressed air setting device.
Test certificates from RTW and ZWS.

Washer 30/1,5/7,5 A4

The removable anchoring solution for demanding fixings.

Advantages

The special active principle allows for a simple hammerset installation and therefore a short processing time.
The extremely short anchor depth prevents reinforcement hits and creates the conditions for a trouble-free installation.
The optimised expansion clip ensures a good hold when the anchor is placed into the drill hole and prevents it from falling out during overhead installations.
The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.

The fischer nail anchor FNA II RB is a fastening element made of stainless steel for fastening fire protection boards and for multiple fixing of other non-load-bearing systems. The nail anchor is set in the time-saving through-type installation. After creating the drill hole, the nail anchor is driven in with a few taps of the hammer, or is set using a compressed air setting device. The large, pre-assembled washer increases the pulling forces considerably and prevents damaging the board during removal. The nail head is taken off with special pliers for removal.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Approved for:

Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications

Also suitable for:

Solid sand-lime brick
Natural stone with dense structure
Prestressed hollow-core concrete slabs

You can find detailed information on building materials in the registration document.

Approvals

ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1

Functioning

The FNA II with nail head is suitable for push-through installation.
The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the hole wall.
Available setting tools:
FNA S-SBO for attachment to drill
FNA S-SDS for series installation with a hammer drill
FNA S-H for the manual installation of mounting rails

Installation FNA II RB

1 / 5

Deinstallation

1 / 4

Anchor length	68 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	66 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	36 mm
Min. effect. anchorage depth ( h_ef )	30 mm
Max. fixture thickness ( t _fix )	30 mm
Packaging	Folding box
Amount	200 St.
GTIN (EAN-Code)	4048962205749

fischer Nail anchor FNA II 6 x 30/30 RB (200pcs.) stainless steel A4

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download