Art.-No. 45571

fischer bolt anchor FBN II 16/15 K electro zinc plated

Top Features

Maximum load-bearing capacity in non-cracked concrete. This means: fewer fixing points and smaller anchor plates.
Simple assembly due to few taps and minimal slippage.
The drive-in pin protects the thread from damage. This saves time during installation and removal.

Short and strong: the cost-efficient fixing made of galvanised steel for use in non-cracked concrete.

Advantages

The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

The fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete. The short version is suitable for pre-positioned installation and push-through installation. The bolt anchor is made of zinc-plated steel and is recommended for railings, handrails or consoles in indoor areas.

Functioning

The FBN II K is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-07/0211

European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete

Created on 07/13/2020

DOP - Declaration of Performance

pdf, DoP No. 0192

Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)

Created on 07/27/2020

Load Table

pdf,

Bolt anchor FBN II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Marketing Documents

pdf,

Bolt anchor FBN II. The cost-efficient fixing for flexible use in non-cracked concrete.

ETA-approval
Drill diameter ( d₀ )	16 mm
Min. drill hole depth for through fixings ( h₂ )	104 mm
Anchor length	118 mm
Max. usable length hef,max./hef,min. ( t_fix )	- / 15 mm
Thread ( Ø x length )	M16 x 64 mm
Width across nut	24 mm
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209455715

fischer bolt anchor FBN II 16/15 K electro zinc plated

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download