The cost-efficient fixing with large washer for flexible use in non-cracked concrete.

Bolt anchor FBN II GS

The fischer bolt anchor FBN II with its large washer is a steel anchor for cost-effective fixations in non-cracked concrete. With its large pre-mounted washer, the zinc-plated steel anchor is recommended for the fastening of footing beams and sills as well as for other wood constructions. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation.

Product variants

Download of image data

Product variants

Εγκρίσεις / Πιστοποιήσεις

18 Προϊόν(τα)

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Max. usable length hef,max./hef,min.

Thread

Width across nut

Υπόμνημα = Με πιστοποίηση— = Χωρίς πιστοποίηση

Προβολή 18 από 18 παραλλαγές(ή)

Advantages

The larger washer included with the FBN II GS creates a large supporting surface and, as such, allows for use in wood construction.
The pre-fitted washer ensures a fast assembly.
The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
The anchor is also ideal for large fixture thicknesses.
The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.

Functioning

The FBN II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Installation FBN II

1 / 5

Hammer drill bit Quattric II
74 variants

Bolt anchor FBN II
109 προϊόντα

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	165 mm
Anchor length	174 mm
Max. usable length hef,max./hef,min. ( t_fix )	80 / 95 mm
Thread ( Ø x length )	M12 x 129 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	44 x 4 mm
Packaging	Folding box
Amount	20 St.
GTIN (EAN-Code)	4006209455784

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	185 mm
Anchor length	194 mm
Max. usable length hef,max./hef,min. ( t_fix )	100 / 115 mm
Thread ( Ø x length )	M12 x 149 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	44 x 4 mm
Packaging	Folding box
Amount	20 St.
GTIN (EAN-Code)	4006209455791

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	185 mm
Anchor length	194 mm
Max. usable length hef,max./hef,min. ( t_fix )	100 / 115 mm
Thread ( Ø x length )	M12 x 149 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	44 x 4 mm
Packaging	without
Amount	1 St.
GTIN (EAN-Code)	4006209915653

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	205 mm
Anchor length	214 mm
Max. usable length hef,max./hef,min. ( t_fix )	120 / 135 mm
Thread ( Ø x length )	M12 x 169 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	44 x 4 mm
Packaging	Folding box
Amount	20 St.
GTIN (EAN-Code)	4006209455807

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	205 mm
Anchor length	214 mm
Max. usable length hef,max./hef,min. ( t_fix )	120 / 135 mm
Thread ( Ø x length )	M12 x 169 mm
Width across nut	19 mm
Washer (outer diameter x thickness)	44 x 4 mm
Packaging	without
Amount	1 St.
GTIN (EAN-Code)	4006209915660

Bolt anchor FBN II GS

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

ETA-approval
Drill diameter ( d₀ )	16 mm
Min. drill hole depth for through fixings ( h₂ )	204 mm
Anchor length	218 mm
Max. usable length hef,max./hef,min. ( t_fix )	100 / 115 mm
Thread ( Ø x length )	M16 x 164 mm
Width across nut	24 mm
Washer (outer diameter x thickness)	56 x 5 mm
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209455883