Art.-No. 94872

fischer bolt anchor FAZ II 8/10 GS with large washer

Top Features

Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation.
Minimum torque slippage: Simple assembly saves time as well as wear and tear.
With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
Approval for cracked concrete and fire inspection: maximum safety.

The anchor bolt with a large washer to meet the highest requirements. Powerful and flexible.

Advantages

The FAZ II GS with 8, 10 and 12 mm diameters are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort.
The significantly larger outer diameter of the washers for FAZ II 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
The pre-fitted washer ensures a fast installation.
Furthermore, the FAZ II GS bolt anchor offers all of the benefits of the FAZ II.

The fischer bolt anchor FAZ II GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to simple mounting, the FAZ II GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties.

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Approvals

ETA-05/0069
DoP No. 0186
Z-21.1-2145

Functioning

The FAZ II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-05/0069

European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete

Created on 04/24/2020

DOP - Declaration of Performance

pdf, DoP No. 0186

Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)

Created on 05/15/2020

DIBt, National German Certification

pdf, Z-21.1-2145

General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete

Valid from 07/12/2022
to 07/12/2027

Load Table

pdf,

Bolt anchor FAZ II - Permissible loads of a single anchor in normal concrete of strength class C20/25

ETA-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length	75 mm
Max. usable length hef,max./hef,min. ( t_fix )	10 / 20 mm
Thread ( Ø x length )	M8 x 38 mm
Width across nut	13 mm
Washer (outer diameter x thickness)	22 x 2.5 mm
Packaging	Folding box
Amount	50 St.
GTIN (EAN-Code)	4006209948729

fischer bolt anchor FAZ II 8/10 GS with large washer

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download