fischer bolt anchor FAZ II Plus 12/120 HBS ZP electro zinc plated

SDS Plus II 12/400/450
Quattric II 12/400/455 S

With a large washer, in line with timber construction standards. For highest demands. Powerful and flexible.

Advantages

The FAZ II Plus HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example.
The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
Quick and easier assembly without the need for drill hole cleaning (M8-M24).
Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
The variable anchorage depths allow a millimetre-accurate adjustment to the loads.

The fischer bolt anchor FAZ II Plus HBS with its washer as per the wood construction standard DIN 1052 is the ideal steel anchor for the highest requirements. The anchor is made from zinc-plated and stainless steel and is perfect for the fixation of sills and beams. The large washer ensures even better force transfer. Thanks to the variable anchorage depths and the easy assembly process, the FAZ II Plus HBS can be used particularly flexibly. The tried-and-tested expansion clip introduces the loads into the concrete particularly powerfully and enables a top load-bearing capacity.

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Beton C20/25 bis C50/60, gerissen und ungerissen

Suitable for:

Concrete C12/15 (classification available)
Concrete C80/95 (classification available)
Steel fiber concrete (classification available)
Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

Approvals

ETA-19/0520
DoP No. 0334
3023222

Functioning

The FAZ II Plus HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations.
Before installation, place the hex nut and washer as per the wood construction standard into the optimum position.
When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Push-through installation with hexagon nut

1 / 5

Without borehole cleaning

1 / 6

Push-through installation of the cup nut version with setting gauge

1 / 8

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter( d₀ )	12 mm
Min. drill hole depth for through fixings( h₂ )	210 mm
Max. usable length h_ef,stand/h_ef,min.( t_fix )	120 / 140 mm
Anchor length	225 mm
Thread( Ø x length )	M12 x 171 mm
Width across nut	19 mm
Amount	20 St.
GTIN (EAN-Code)	4048962463095

fischer bolt anchor FAZ II Plus 12/120 HBS ZP electro zinc plated

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download