fischer bolt anchor FAZ II Plus 12/160 GS ZP electro zinc plated

Quattric II 12/400/455 S
SDS Plus II 12/310/360

With large washer. For highest demands. Powerful and flexible.

Advantages

The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort.
The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
Quick and easier assembly without the need for drill hole cleaning (M8-M24).
Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
The variable anchorage depths allow a millimetre-accurate adjustment to the loads.

The fischer bolt anchor FAZ II Plus GS with its large washer is the ideal bolt anchor for the highest requirements. With the steel anchor made from zinc-plated and stainless steel, heavy loads are secured in cracked and non-cracked concrete. The steel anchor with the large washer is perfect for securing steel components with slots, for example. Thanks to the variable anchorage depths and the easy assembly process, the FAZ II Plus GS can be used particularly flexibly. The tried-and-tested expansion clip introduces the loads into the concrete particularly safely, and enables a top load-bearing capacity.

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Beton C20/25 bis C50/60, gerissen und ungerissen

Suitable for:

Concrete C12/15 (classification available)
Concrete C80/95 (classification available)
Steel fiber concrete (classification available)
Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

Approvals

ETA-19/0520
DoP No. 0334
3023222

Functioning

The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.

Push-through installation with hexagon nut

1 / 5

Without borehole cleaning

1 / 6

Push-through installation of the cup nut version with setting gauge

1 / 8

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter( d₀ )	12 mm
Min. drill hole depth for through fixings( h₂ )	250 mm
Max. usable length h_ef,stand/h_ef,min.( t_fix )	160 / 180 mm
Anchor length	260 mm
Thread( Ø x length )	M12 x 186 mm
Washer (outer diameter x thickness)	44 x 4 mm
Width across nut	19 mm
Amount	20 St.
GTIN (EAN-Code)	4048962462838

fischer bolt anchor FAZ II Plus 12/160 GS ZP electro zinc plated

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download