fischer Bridge-cap Head-plate FCC-HP M20 R stainless steel

Name: fischer Bridge-cap Head-plate FCC-HP M20 R stainless steel
Brand: fischer

Product variants

Download of image data

Top Features

Increased bonded stress at bridge edge beam anchors.

Head plate for the bridge cap anchor FCC-B.

Advantages

The fischer bridge cap anchor FCC-B is approved for anchoring in reinforced and unreinforced concrete of strength class from C20/25 and maximum C50/60 according to DIN EN 206-1.
The approved sealing washer ensures secure sealing of the penetrated sealing membrane.
With the wide range of anchors in diameters M16 to M24, the system offers the right solution for every project.

The head plate fischer FCC-HP is regulated in the general design approval of the fischer concrete connector FCC. The FCC-HP is an optional accessory for the bridge cap anchor FCC-B and replaces the nut as shear connection.

Functioning

The head plate FCC-HP is a supplement to the FCC-B system.
The system consists of the fischer injection mortars FIS EM Plus or FIS SB and the FCC-B bridge cap anchor.
The bridge cap anchor is installed by hand with a slight rotating movement down to the bottom of the drill hole.
The injection mortar connects the threaded rod to the concrete via bond stress.
The enclosed sealing washer is bonded with the injection mortar, therefore seals the penetration in the sealing membrane.
The connection between the exisiting and new concrete is realized by the headed bolt and the corresponding nut or head plate.

Installation with hammer drill with FIS EM Plus and FIS SB

1 / 8

Installation with diamond drill with FIS EM Plus

1 / 10

Height( H )	18 mm
Amount	10 St.
GTIN (EAN-Code)	4048962499230

fischer Bridge-cap Head-plate FCC-HP M20 R stainless steel

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download