The fire-protection-tested metal insulation support for fire-resistant insulating boards.

Insulation support DHM

The fischer insulation support DHM is a fire-tested metal insulation support for pressure-resistant insulation boards. The fire resistance rating F 120 guarantees a secure fixing of fire-resistant insulation. The DHM is hammered in the pre-positioned installation. The simple hammer installation allows fast setting, thereby reducing the amount of work. The spring steel expands in the building material and holds the insulation boards securely in concrete, aerated concrete, solid and hollow building materials. The DHM is hammered into aerated concrete without pre-drilling. This saves time.

Product variants

Download of image data

Product variants

Approvals / Test reports

14 Product variant (s)

Drill diameter

Disc ø

Anchor length

Min. drill hole depth

Min. effect. anchorage depth

Usable length

Legend = Permission Available— = Permission not Available

Viewed 14 of 14 variant (s)

Advantages

The metal insulation support achieves fire resistance F 120. This means that it can be used where there are fire resistance requirements.
The DTM 80 plate for soft insulating materials (available separately) simplifies storage and minimises costs.
The simple hammer installation allows fast setting, thereby reducing the amount of work.
The shaft geometry allows setting in aircrete without pre-drilling, thus saving a stage of installation.
The DHM is available in hot-dip galvanised steel or stainless steel A 2.

Applications

To fix fire-resistant soft or pressure-resistant insulating materials, such as:

Mineral / glass wool
Light building boards made of wood wool
Foam glass tiles

Also suitable for:

Polystyrene boards
Coir matting

Building materials

Concrete
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Natural stone with dense structure
Aerated concrete
Solid brick made from lightweight concrete
Solid brick

You can find detailed information on building materials in the registration document.

Approvals

Z-21.8-2057
EPD-FIW-20210314-CBD1-EN

Functioning

The insulation support is set in push-through installation using a hammer.
The spring steel expands when hammered into the base material.
Use the DTM 80 plate (available separately) to fix soft insulating materials.

Installation DHM

1 / 4

1
2
3
4

System components

Hammer drill bit Quattric II
74 variants

DIBt-approval
Drill diameter ( d₀ )	8 mm
Disc ø	35 mm
Anchor length ( l )	80 mm
Min. drill hole depth ( h₁ )	50 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Usable length ( t_fix )	10 - 40 mm
Packaging	Folding box
Amount	250 St.
GTIN (EAN-Code)	4048962246940

DIBt-approval
Drill diameter ( d₀ )	8 mm
Disc ø	35 mm
Anchor length ( l )	110 mm
Min. drill hole depth ( h₁ )	50 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Usable length ( t_fix )	40 - 70 mm
Packaging	Folding box
Amount	250 St.
GTIN (EAN-Code)	4048962246957

DIBt-approval
Drill diameter ( d₀ )	8 mm
Disc ø	35 mm
Anchor length ( l )	140 mm
Min. drill hole depth ( h₁ )	50 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Usable length ( t_fix )	70 - 100 mm
Packaging	Folding box
Amount	250 St.
GTIN (EAN-Code)	4048962246964

DIBt-approval
Drill diameter ( d₀ )	8 mm
Disc ø	35 mm
Anchor length ( l )	170 mm
Min. drill hole depth ( h₁ )	50 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Usable length ( t_fix )	100 - 130 mm
Packaging	Folding box
Amount	250 St.
GTIN (EAN-Code)	4048962246971

DIBt-approval
Drill diameter ( d₀ )	8 mm
Disc ø	35 mm
Anchor length ( l )	200 mm
Min. drill hole depth ( h₁ )	50 mm
Min. effect. anchorage depth ( h_ef )	40 mm
Usable length ( t_fix )	130 - 160 mm
Packaging	Folding box
Amount	250 St.
GTIN (EAN-Code)	4048962246988

Insulation support DHM

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download