Render fixing FIF-CS 8

The economic screw fixing for all ETICS insulation materials

The ETA approved fischer render fixing FIF-CS is ideal for fixing pressure-resistant insulation up to 340 mm thick for thermal insulation systems such as polystyrene boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely . The uniform setting depth for all building materials simplifies installation. The screw fixing comprises a grey plug sleeve with attached octogonal disc and a compound screw. The compound screw minimises the thermal bridge. This in turn prevents plug marks on the façade. The FIF-CS 8 is set with a standard screwdriver.

Product Description

Advantages

Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade.

Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate.

With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render.

For insulation material thicknesses up to 340 mm.

Standard embedment depth for all building materials.

Available Product Variants

Application and Permission

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush installation in all conventional insulation materials

Building materials

Building material classes A, B, C, D, E
Concrete
Concrete (weather shell)
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Permission

ETA-15/0006
DoP 0254
DoP No. 0010
DoP No. 0141
EPD-FIW-20210314-CBD1-EN

For Details see corresponding Documents

Assembly Instruction

Functionality

The fixing is pushed through the insulation into the drilled hole and is screwed tight.

For lengths from 250 mm, at least 180 mm long TX25 bits are required. These are not included in the delivery assortment.

Documents for Downloading

Additional Documents

(PDF, 44 KB)

Approvals

Title	Type	Created	Valid Till
(PDF, 1 MB) European Technical Assessment for fischer FIF-CS-8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry	ETA-15/0006	5/31/2018
(PDF, 1 MB) Declaration of Performance for fischer FIF-CS-8	DoP 0254	1/15/2021
(PDF, 3 MB) Declaration of Performance for fischer FIF-CS-8	DoP No. 0010	4/9/2015
(PDF, 791 KB) Declaration of Performance for fischer FIF-CS-8	DoP No. 0141	6/7/2018
(PDF, 932 KB) Environmental Product Declaration for fischer Insulation fixings	EPD-FIW-20210314-CBD1-EN	2/22/2022	2/21/2027

System Components & Related Categories

System Components

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

More Information

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information