Product Picture
Application Picture
Application Picture
1   1

Render fixing FIF-CN II 8

The pre-assembled drive anchor with innovative steel-plastic nail

The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.

Product Description

Advantages
  • To set with few hammer blows.
  • The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
  • High retention forces thanks to the steel tip of the compound nail.
  • Small anchoring depth of 35 mm saves on drilling times.
  • The FIF-CN II 8 is virtually free of thermal bridging due to the compound nail.
  • The compression zone in the shank allows the disc to be drawn in precisely.
  • For insulating material thicknesses up to 340 mm.

Available Product Variants


0

Application and Permission

Applications
  • Attachment of ETICS insulating boards on concrete and masonry
  • Flush-to-surface installation in ETICS insulating materials and mineral wool e.g. polystyrene
Building materials
  • Building material classes A, B, C, D, E
  • Concrete
  • Full blocks made from concrete
  • Building brick
  • Solid sand-lime brick
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Lightweight aggregate concrete
  • Aerated concrete
You can find detailed information on building materials in the registration document.

Permission

  • ETA-18/0393
  • DoP No. 0143
  • DoP No. 0143
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The fixing is set in push- through installation.
  • Simple, fast setting by driving the compound nail in using a standard hammer.
  • Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture

Documents for Downloading

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 2 MB) ETA-18/0393 5/29/2018
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0143 6/6/2018
DOP - Declaration of Performance (PDF, 1 MB) DoP No. 0143 6/6/2018

System Components & Related Categories

fe80::8ba:1879:f52e:7ce6%5