Name: fischer TermoZ PN 8/170
Brand: fischer

The thermal bridge-free ETIC hammerset with GFK nail.

Advantages

Due to the special architecture of the fixing, small drill hole depths are possible.
The crumble zone allows an exact washer penetration.
The asymmetric expansion element ensures a perfect anchoring even in hollow and problem substrates.
The innovative shank and the special geometry of the nylon nail minimize the failure tendency significant particularly in full substrates.
The washer thickness of only 2.5 mm allows thin and economic reinforcement layers.
Due to the nylon nail the TermoZ PN provides nearly no thermal bridging and helps saving energy.
Can be combined with insulation retaining washers DT 90, 110 and 140 mm.

The fischer TermoZ PN 8 is ideal for fixing pressure-resistant insulation boards with rendering such as polystyrene boards, Mineral wool boards, wood shaving lightweight panels and PU panels in concrete, aerated concrete, solid and perforated brick securely and without thermal bridges. The European Technical Assessment guarantees a secure hold. The fischer TermoZ PN comprises a grey plug sleeve with attached disc and a plastic nail. The TermoZ PN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The innovative plug shaft and the special geometry of the plastic nail give the plug a secure hold even in solid building materials. The asymmetric expansion element ensures a secure hold even in perforated building materials and unknown subsurface.

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush-to-surface installation in ETICS insulating materials e.g. polystyrene and mineral wool

Building materials

Building material classes A, B, C, D, E
Concrete
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Approvals

ETA-09/0171
DoP No. 0325
EPD-FIW-20210314-CBD1-EN

Functioning

Hammerset fixing for the mounting of ETICS-Systems with Polystyrene board or insulation boards in concrete and masonry.
Per hammering in the preassembled plastic nail with a hammer the fastener will be fixed in the substrate.
Embedment depth of min 35 mm in the substrate is needed.
Non load bearing layers such as adhesives and old render are to be included in the required useful length.

Installation FIF-PN 8

1 / 4

1
2
3
4

ETA-approval
Drill diameter ( d₀ )	8 mm
Anchor length ( l )	170 mm
Min. effect. anchorage depth ( h_ef )	35 mm
Max. fixture thickness ( t _fix )	130 mm
Min. total drill whole depth incl. insulation	175 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4048962073171

fischer TermoZ PN 8/170

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download