Application picture
Application picture
1   1

fischer termoz CNplus 8/110

The versatile ETICS hammerset fixing with the option to be screw set.

Art.-No. 540376

Product Description

The fischer termoz CNplus is ideal for securely fixing pressure-resistant insulation up to 340 mm thick, such as polystyrene boards and mineral wool boards. The European Technical Assessment guarantees secure hold and regulates the use in all building material classes and insulation types. The termoz CNplus is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. However, it can also be screwed into the anchoring base. The flexible hammerset is placed exactly flush to the surface or countersunk, depending on the desired application. The termoz CNplus can also be adjusted with the screwdriver and removed without problems.
Advantages
  • termoz CNplus is a hammerset anchor with the option to be screw set. The plug is suitable for all building material and insulation types. Through the flexible use the warehouses and ordering processes are reduced.
  • With the fast and simple hammerset installation the plugs set too deep can be readjusted with the aid of the screwdriver. This saves working time and helps to avoid fixing marks.
  • During the screw installation the termoz CNplus can be set countersunk or flush. For different set results only one plug is required.
  • Moreover the screw installation enables an accurate setting due to an optimum application on the insulation surface. Also with soft insulation.
  • The compound nail ensures a high energy efficiency with the countersunk screw installation, because there is nearly no heat transmission.

Application and Permission

Applications
  • Attachment of ETICS insulating boards on concrete and masonry
  • Flush installation in ETICS insulating boards, e.g. polystyrene and mineral wool
  • Countersunk installation in ETICS insulating boards, e.g. polystyrene and mineral wool, incl. a closing cap for covering
Building materials
  • Building material classes A, B, C, D, E
  • Concrete
  • Full blocks made from concrete
  • Building brick
  • Solid sand-lime brick
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Lightweight aggregate concrete
  • Aerated concrete
You can find detailed information on building materials in the registration document.

Permission

  • ETA-09/0394
  • DoP No. 0091
For Details see corresponding Documents

Assembly Instruction

Functioning
  • The plug is set in push-through installation.
  • Simple, fast setting by driving the compound nail in using a standard hammer.
  • The setting process with the screwdriver is performed flush with a standard Bit T 25.
  • For countersunk installation the setting tool CNplus is required. The insulation disk is covered with a closing cap.
  • Non-load bearing layers, such as adhesive and old plaster, are included in the maximum useful length.
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic
Installation graphic

Technical Data

ETA-approval
Drill hole diameter 8 [mm]
Anchor length 110 [mm]
Min. drill hole depth 45 [mm]
Effect. anchorage depth 35 [mm]
Max. usable length 70 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962278491
Legend   =  Permission available

Documents for Downloading

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 5 MB) European Technical Assessment for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8 ETA-09/0394 12/19/2017
DOP - Declaration of Performance (PDF, 6 MB) Declaration of Performance fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8, according European Technical Assessment ETA-09/0394 DoP No. 0091 4/6/2017
fe80::283b:1a2:f52e:7ce5%9