The undercut anchor for soft natural stone façade panels.

Zykon-Panel anchor FZP II SH

The concealed stand-off installation solution for heavy façade panels made of selected soft natural stone (stone group IV - sedimentary rock). This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thickness tolerances and create a flat façade surface by using stand-off installation anchors.

Variante de produs

Download of image data

Variante de produs

2 produkt varijanti

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Pregledano 2 od 2 verzija

Advantages

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Applications

Exterior façades with heavy façade panels made of selected, soft natural stone (stone group IV - sedimentary rock)
Interior façades with heavy façade panels made of selected, soft natural stone (stone group IV - sedimentary rock)

Building materials

Building materials Natural stone (stone group IV) (> 50mm)

Puteți găsi informații detaliate despre materialele de construcție în documentul de înregistrare

Functioning

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP SH R - flush

1 / 4

1
2
3
4

Installation FZP SH R/AL - stand-off

1 / 6

1
2
3
4
5
6

Min. panel thickness	50 mm
Embedment depth	30 mm
Total length ( l )	49 mm
Installed anchor length	30 mm
Remaining thread length	19 mm
Thread ( M )	M8
Cylindrical diameter	13 mm
Undercutdiameter	17,3 mm
System	—
Amount	50 St.
GTIN (EAN-Code)	4048962171501

Min. panel thickness	50 mm
Embedment depth	30 - 36 mm
Total length ( l )	64 mm
Installed anchor length	41 mm
Remaining thread length	23 mm
Thread ( M )	M8
Cylindrical diameter	13 mm
Undercutdiameter	17,3 mm
System	—
Amount	50 St.
GTIN (EAN-Code)	4048962171518

Zykon-Panel anchor FZP II SH

Variante de produs

Avantajele / Descrierea produsului

Aplicație și aprobare

Instrucțiuni de asamblare