fischer Tergo+ 11x5 M6/T/11 PA

The specialist for thin fibre cement façade panels by Equitone.

Advantages

The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure and is attached at the fifth point in a structurally optimised location. This provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin fibre cement façade panels from Equitone bigger than 8 mm in thickness, such as linea, tectiva, materia, natura, pictura. Use in conjunction with clasps systems on façades or with other attachments.

Functioning

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Mounting Strip 1 Picture

1 / 4

1
2
3
4

Anchorage depth ( h_ef )	5 mm
Min. panel thickness	8 mm
Type	Thin panels anchor
Total length ( l )	7,5 mm
Projection length	11 mm
Thread ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Material	A4
Material sleeve	Polyamid PA 6
Color	orange
Amount	250 St.
GTIN (EAN-Code)	4048962362091

fischer Tergo+ 11x5 M6/T/11 PA

The advantages / Product description

Application and approval

Assembly instruction

Technical data