Name: fischer ATK601 Set E-14/230-T33/80/3 A4
Brand: fischer

Fixed/sliding point bracket set ATK 601 for push-through installation as rod-system.

Advantages

Enables retrofitting of ventilated rainscreen façades.
By means of the push-through and stand-off installation, the wall holder can also be used in already insulated substrates.
Applicable for horizontal and vertical systems.
The passive house certification guarantees sustainable and energy-efficient fixing.
Different load levels are applicable through multiple anchorage depths.

The ATK 106 SZ 20 Z-profile is a part of the BWM subframe system ATK 106 SZ 20 and is used in combination with the horizontal S-profile of the system in the façade surface. In addition, it is used for the upper horizontal closure to the window sill and parapet. The profiles are available in 6 m length as standard.

Properties

Anchor: Polyamid and stainless steel or zinc-plated steel
Attachment parts: Aluminum (e.g. EN AW 6063) and stainless steel

Applications

As a wall holder set for renovating existing façades
Consisting of a frame fixing anchor, as well as an attachment part and a T-piece
For load transfer into the building substrate of subframe systems in ventilated rainscreen façades

Building materials

Vertically perforated brick
Aerated concrete
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid block made from lightweight and normal weight concrete
Solid brick
Solid sand-lime brick
Concrete ≥ C12/15

Detaljerad information om byggmaterial finns i registreringsdokumentet.

Godkännanden

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008
1281fa03

Length	33 mm
Width	50 mm
Height ( H )	60 mm
Thickness	3 mm
Hole pattern	4x 4.1 mm
Hole pattern profile	2x 5.1 / 2x 5.5x15 mm
Drill diameter ( d₀ )	14 mm
Min. drill hole depth ( h₁ )	245 mm
Min. embedment depth	70 mm
Length	220 / 200 mm
Usable length at anchorage depth 70mm ( t_fix )	152 mm
Usable length at anchorage depth 90mm ( t_fix )	132 mm
Anchor length ( l )	230 mm
System	—
Contents	50 x SXRL 14 T R, 50 x base plate, 50 x T-console, 100 x rivet
Amount	1 St.
GTIN (EAN-Code)	4048962420067

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Skapad den 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Skapad den 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Skapad den 05/08/2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Skapad den 05/08/2024

fischer ATK601 Set E-14/230-T33/80/3 A4

Fördelarna/produktbeskrivning

Ansökan och godkännande

Monteringsinstruktion

Tekniska data

Dokument att ladda ned