The internal threaded anchor for detachable fixations in concrete.

Internal-threaded anchor RG M I

The fischer internal threaded anchor RG M I is a system component for use with the fischer resin capsules RSB and RM II and the fischer injection mortars FIS SB, FIS EM Plus, FIS V, FIS VL, and FIS Green for fixations in concrete. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the RG M I is particularly suited for detachable and temporary fixings both inside and outside. The approvals of the various resin capsules and injection mortars must be observed.

Product variants

Download of image data

Product variants

Тех.оценки / Протоколы испытаний

12 Вариант(ы) продукта

Drill diameter

Thread

Scale parts mortar

Packaging

Amount

GTIN (EAN-Code)

Обозначение = Разрешение доступно— = Разрешение недоступно

Показано 12 из 12 товарных групп

Advantages

The internal threaded anchor RG MI is suitable for use with resin capsules or injection mortars in concrete.
The internal threaded anchor RG MI allows for the surface-flush removal and reuse of the fixing point. It therefore offers great flexibility.
The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
Please refer to the approvals of the resin capsules and injection mortar used.

Functioning

For use in conjunction with resin capsules:

The internal threaded anchor RG M I is set using a hammer drill and the accompanying setting tool in rotating and hitting motions.
During setting, the oblique edge of the internal threaded anchor destroys the capsule, and mixes and activates the mortar.

For use in conjunction with injection mortars:

The RG M I is set manually by lightly rotating it until it reaches the drill hole base.
The mortar bonds the entire surface of the internal threaded anchor with the drill hole wall and seals the drill hole.

Installation in concrete with capsule RSB and RG M I

1 / 6

1
2
3
4
5
6

Hammer drill bit Quattric II
74 вариантов

ETA-approval	—
Drill diameter ( d₀ )	10 mm
Thread ( M )	M5
Scale parts mortar	3
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209482216

ETA-approval	—
Drill diameter ( d₀ )	12 mm
Thread ( M )	M6
Scale parts mortar	3
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209482223

ETA-approval
Drill diameter ( d₀ )	14 mm
Thread ( M )	M8
Scale parts mortar	3
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209505526

ETA-approval
Drill diameter ( d₀ )	18 mm
Thread ( M )	M10
Scale parts mortar	4
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209505533

ETA-approval
Drill diameter ( d₀ )	20 mm
Thread ( M )	M12
Scale parts mortar	6
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4006209505625

Internal-threaded anchor RG M I

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

ETA-approval
Drill diameter ( d₀ )	24 mm
Thread ( M )	M16
Scale parts mortar	8
Packaging	Folding box
Amount	5 St.
GTIN (EAN-Code)	4006209505632

ETA-approval
Drill diameter ( d₀ )	32 mm
Thread ( M )	M20
Scale parts mortar	24
Packaging	Folding box
Amount	5 St.
GTIN (EAN-Code)	4006209505649