Art.-No. 506884

GTIN (EAN-Code): 4048962077964

fischer Highbond anchor FHB II-A S M 10 x 75/10 gvz

Name: fischer Highbond anchor FHB II-A S M 10 x 75/10 gvz
Brand: fischer

Product variants

Download of image data

Top Features

Reduces anchorage depth, lowers expense when drilling and installing. This saves costs.
Through-type installations without additional aids. This saves time.
Optimised for low axial and edge distances in cracked concrete.
No drill hole cleaning is required when using a resin capsule. This saves time.
ETA approval for cracked concrete.

FHB II-PF 10 X 75
FHB II-P 10 x 75
RA-SDS
BS ø 10
Quattric II 10/100/165

The best performance in cracked concrete with the least installation effort

Advantages

The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.

The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas.

Applications

Suitable for:

Façades
Staircases
Steel brackets
Masts
Rash protection
Steelwork constructions
Timber constructions

Ideal for:

Push-through installation

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

You can find detailed information on building materials in the registration document.

Approvals

ETA-05/0164
ETA-21/0948
DoP No. 0282
DoP No. 0293
DoP No. 0327
GS 3.2/16-352-1
(2103/12/12) - CM

Functioning

The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

View assembly instructions as PDF

Pre-positioned installation in concrete with FIS HB

1 / 9

Installation in concrete with capsule FHB II-P / -PF

1 / 5

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Created on 12/14/2017

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Created on 01/19/2021

ETA Certification Document

pdf, ETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

Created on 09/09/2022

DOP - Declaration of Performance

pdf, DoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)

Created on 09/16/2022

DOP - Declaration of Performance

pdf, DoP No. 0293

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)

Created on 01/03/2022

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	90 mm
Anchorage depth ( h_ef )	75 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	4
Packaging	Folding box
Amount	10 St.
GTIN (EAN-Code)	4048962077964

fischer Highbond anchor FHB II-A S M 10 x 75/10 gvz

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download