Highbond anchor FHB II-A S Inject

The economical solution in cracked concrete

The Highbond anchor rod FHB II-AS Inject A4 is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AS Inject A4 for example guard rails and steel constructions are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Product Description

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.

The combination of injection mortar FIS HB and anchor rod FHB II-AS Inject A4 (short version) is ideally suited for serial installation outdoors.

The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.

When using hollow drills with extraction, no drill hole cleaning is required.

Available Product Variants

Application and Permission

Applications

Guard rails
Façades
Staircases
Steel constructions
Masts

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

You can find detailed information on building materials in the registration document.

Permission

ETA-16/0637, ETAG 001-5
ETA-21/0948
DoP No. 0084
DoP No. 0129
(2103/12/12) - CM
GS 3.2/16-352-1

For Details see corresponding Documents

Assembly Instruction

Functionality

The FHB II-AS Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.

The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.

When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Documents for Downloading

Additional Documents

(PDF, 50 KB)

Approvals

Title	Type	Created	Valid Till
(PDF, 6 MB) European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete	ETA-16/0637, ETAG 001-5	12/14/2017
(PDF, 4 MB) European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life	ETA-21/0948	12/21/2021
(PDF, 2 MB) Declaration of Performance fischer Highbond-Anchor FHB II Inject, according European Technical Assessment ETA-16/0637	DoP No. 0084	1/31/2017
(PDF, 4 MB) Declaration of Performance for fischer Highbond-Anchor FHB II Inject	DoP No. 0129	12/20/2017
(PDF, 870 KB)	(2103/12/12) - CM	7/15/2021	7/15/2026
(PDF, 3 MB)	GS 3.2/16-352-1	2/7/2017	2/6/2027