fischer Highbond anchor FHB II-A L Inject M16 x 160/30 A4

Name: fischer Highbond anchor FHB II-A L Inject M16 x 160/30 A4
Brand: fischer

Productvarianten

Download of image data

Top Features

For high loads in cracked concrete.
Economical in serial installation.
Low drill hole depth means less drilling effort.
No drill hole cleaning when using a hollow drill with extraction.
Suitable for pre-positioned and push-through installation.

The economical solution in cracked concrete.

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

The Highbond anchor rod FHB II-AL Inject A4 is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AL Inject A4 for example guard rails and steel brackets are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Functioning

The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Pre-positioned Installation in concrete with FIS HB

1 / 8

Push-through installation in concrete with FIS HB

1 / 8

ETA-approval
Drill diameter ( d₀ )	18 mm
Drill hole depth ( h₀ )	166 mm
Anchorage depth ( h_ef )	160 mm
Max. fixture thickness ( t _fix )	30 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 St.
GTIN (EAN-Code)	4048962273045

fischer Highbond anchor FHB II-A L Inject M16 x 160/30 A4

Productomschrijving

Toepassing en goedkeuring

Montage instructies

Technische gegevens

Documenten om te downloaden