The dynamic push-through anchor for an economical serial installation at medium load level.

Dynamic-Anchor FDA

The fischer dynamic-anchor FDA is processed with the injection mortar FIS HB. The anchor has general building regulations approval for dynamic applications in cracked concrete. Because of its cone shape is us suitable for fixing moderate load levels of dynamic loads indoors. The preinstalled threaded rod and the push-through installation allow rapid progress and predestine it for economical series installation. Platform lifts and conveyor systems, for example, are fixed with the Dynamic-Anchor FDA.

Product variants

Download of image data

Product variants

Approvals / Test reports

4 Product variant (s)

Drill diameter

Anchorage depth

Thread

Width across nut

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

Viewed 4 of 4 variant (s)

Functioning

The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
FDA is approved push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.

Installation in concrete with FIS HB and FDA

1 / 9

ETA Certification Document

pdf, ETA-20/0206

European Technical Assessment for fischer Dynamic-Anchor FDA - Post-installed fasteners in concrete under fatigue cyclic loading

Created on 06/29/2020

DOP - Declaration of Performance

pdf, DoP No. 0199

Declaration of Performance for fischer dynamic anchor FDA (Bonded fastener for use in concrete)

Created on 03/16/2021

ETA Certification Document

pdf, ETA-06/0171

European Technical Assessment for fischer Highbond-Anchor FHB / FHB dyn / FDA - Bonded fasteners and bonded expansion fasteners for use in concrete

Created on 07/10/2024

DOP - Declaration of Performance

pdf, DoP No. 0355

Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)

Created on 10/08/2024

Hammer drill bit Quattric II
74 variants

ETA-approval
Drill diameter ( d₀ )	14 mm
Anchorage depth ( h_ef )	100 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 St.
GTIN (EAN-Code)	4048962252941

ETA-approval
Drill diameter ( d₀ )	14 mm
Anchorage depth ( h_ef )	100 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 St.
GTIN (EAN-Code)	4048962252965

ETA-approval
Drill diameter ( d₀ )	18 mm
Anchorage depth ( h_ef )	125 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 St.
GTIN (EAN-Code)	4048962252972

ETA-approval
Drill diameter ( d₀ )	18 mm
Anchorage depth ( h_ef )	125 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 St.
GTIN (EAN-Code)	4048962252989

Dynamic-Anchor FDA

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download