Plasterboard fixing metal GKM

Product variants

7 Product variant (s)

Anchor length

Min. thickness to first supporting layer

Screw

Drive

Max. load in gypsum plasterboard 12.5 mm

Max. load in gypsum plasterboard 9.5 mm

Viewed 7 of 7 variant (s)

Advantages

Due to its material properties, the GKM can be used in gypsum plasterboard and gypsum fibreboard, and can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.
The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
The cross-drive recess means that a standard screwdriver or bit can be used. No special setting tool is required.
The short fixing length means that only a small amount of space is required behind the board. As a result, the GKM can also be used in the case of unknown board thickness and cavity depth.

Functioning

The GKM is suitable for pre-positioned installation.
The self-tapping metal fixing GKM taps itself into the plasterboard with a positive fit.
Flush installation in the board building material. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
Pre-drill with a ø 8 mm drill bit when using gypsum fibreboard and double-planked gypsum plasterboard.
Not suitable for tiled plasterboard.

Installation GKM

1 / 4

Anchor length( l )	31 mm
Min. thickness to first supporting layer( t )	35 mm
Screw( d_s x l_s )	4.0-5.0xLs mm
Drive	—
Max. load in gypsum plasterboard 12.5 mm	8
Max. load in gypsum plasterboard 9.5 mm	7
Contents	10 x GKM
Packaging	Blister card
Amount	10 St.
GTIN (EAN-Code)	4048962069563

Anchor length( l )	31 mm
Min. thickness to first supporting layer( t )	35 mm
Screw( d_s x l_s )	4.0 - 5.0 x l_s mm
Drive	—
Max. load in gypsum plasterboard 12.5 mm	8
Max. load in gypsum plasterboard 9.5 mm	7
Contents	—
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209245569

Anchor length( l )	31 mm
Min. thickness to first supporting layer( t )	35 mm
Screw( d_s x l_s )	4.5x35 mm
Drive	PZ2
Max. load in gypsum plasterboard 12.5 mm	8
Max. load in gypsum plasterboard 9.5 mm	7
Contents	6 x GKM, 6 x chipboard screw 4.5 x 35
Packaging	Blister card
Amount	6 St.
GTIN (EAN-Code)	4006209151587

Anchor length( l )	31 mm
Min. thickness to first supporting layer( t )	35 mm
Screw( d_s x l_s )	4.5x35 mm
Drive	PZ2
Max. load in gypsum plasterboard 12.5 mm	8
Max. load in gypsum plasterboard 9.5 mm	7
Contents	6 x GKM, 6 x chipboard screw 4.5 x 35
Packaging	Blister card
Amount	6 St.
GTIN (EAN-Code)	4006209909171

Anchor length( l )	31 mm
Min. thickness to first supporting layer( t )	35 mm
Screw( d_s x l_s )	4.5x35 mm
Drive	PZ2
Max. load in gypsum plasterboard 12.5 mm	8
Max. load in gypsum plasterboard 9.5 mm	7
Contents	—
Packaging	Blister card
Amount	25 St.
GTIN (EAN-Code)	4048962266597