Art.-No. 46976

fischer bolt anchor FAZ II 8/30 E item pricing

Top Features

Powerful in concrete.
Simple to assemble.
Flexible in interior areas.

The anchor bolt to meet the highest requirements in concrete. Powerful and flexible.

Advantages

According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time.
The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
The international approvals guarantee maximum safety and the best performance.

The fischer anchor bolt FAZ II is recommended for fixing heavy objects in concrete. The proven expansion clip corresponds to the strictest requirements expected of the steel anchor. When tightening, the expansion clip pulls the nut towards the drill hole wall and ensures that it is safely fixed. The steel anchor can be easily mounted. Drive in using the hammer, then tighten with a torque wrench - job done. The bolt anchor made of zinc-plated steel can be used in a particularly flexible manner, as a wide range of objects in internal areas can be fixed, such as TV consoles, bannisters, or cable trays.

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Concrete C80/95 (classification available)

You can find detailed information on building materials in the registration document.

Approvals

ETA-05/0069
DoP No. 0186
Z-21.1-2145

Functioning

The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS anchor bolt setting tool.

ETA Certification Document

pdf, ETA-05/0069

European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete

Created on 04/24/2020

DOP - Declaration of Performance

pdf, DoP No. 0186

Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)

Created on 05/15/2020

DIBt, National German Certification

pdf, Z-21.1-2145

General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete

Valid from 07/12/2022
to 07/12/2027

Load Table

pdf,

Bolt anchor FAZ II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

ETA-approval
Seismic-Approval	C1
Drill diameter	8 mm
Min. drill hole depth for through fixings	85 mm
Anchor length	95 mm
Max. usable length hef,max./hef,min.	30 / 40 mm
Thread	M8 x 58 mm
Width across nut	13 mm
Amount	1 St.
GTIN (EAN-Code)	4006209469767

fischer bolt anchor FAZ II 8/30 E item pricing

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download