Art.-No. 48264

fischer hammerset anchor EA II M6 electro zinc plated

Top Features

Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
Use of standard metric screws and threaded rods lowers complexity.
Power-saving series installation with machine setting tool EA II S-SDS.
Visual control due to embossing.
ETA approval for non-cracked concrete and multiple fixings.

The internally threaded anchor with a rim for simple Hammerset installation.

Advantages

The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded.
The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.

Applications

Pipelines and ventilation ducts
Sprinkler systems
Cable conduits and wires
Gratings
Steel constructions
Machines
Consoles
Shuttering props

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Approvals

ETA-07/0135
ETA-07/0142
DoP No. 0291
DoP No. 0292
DoP No. 0756-CPD-0332

Functioning

The EA II is suitable for pre-positioned installation.
Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
The setting tools must sit on the rim of the anchor to ensure correct expansion.

Mounting Strip 1 Picture

1 / 7

ETA Certification Document

pdf, ETA-07/0135

European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete

Created on 10/20/2021

DOP - Declaration of Performance

pdf, DoP No. 0291

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Created on 10/27/2021

ETA Certification Document

pdf, ETA-07/0142

European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems

Created on 09/24/2021

DOP - Declaration of Performance

pdf, DoP No. 0292

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Created on 09/30/2021

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0332

Declaration of Performance for fischer Drop-in anchor EA II

Valid from 06/11/2013
to 06/12/2028

Load Table

pdf,

Hammerset anchor EA II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in pre-stressed hollow core slabs of concrete C30/37 up to C50/60.

Accessories

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. bolt penetration ( l_E,min )	6 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4006209482643

fischer hammerset anchor EA II M6 electro zinc plated

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download