The economic screw fixing for all ETICS insulation materials

termoz CS 8

Name: termoz CS 8
Brand: fischer

The fischer termoz CS is ideal for fixing pressure-resistant insulation up to 340 mm thick for thermal insulation systems such as polystyrene boards or mineral wool boards in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely and with European Technical Assessment. The uniform setting depth for all building materials simplifies installation. The screw fixing comprises a grey plug sleeve with attached disc and a compound screw. The compound screw minimises the thermal bridge. This in turn prevents plug marks on the façade. The termoz CS 8 is set with a standard screwdriver. The compound screw is flush-mounted or countersunk as required. The countersunk installation is performed with the fischer setting tool CS.

Product variants

Download of image data

Product variants

1 Product variant (s)

Drill diameter

Max. usable length at surface-flush installation

Max. usable length at countersunk installation

Drive

Packaging

Amount

Legend = Permission Available— = Permission not Available

Viewed 1 of 1 variant (s)

Advantages

Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade.
Recessed installation with round cap provides a smooth surface for thinner render layer.
Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate.
With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render.
While flush installation the anchor washer can be combined with larger insulation disc DT 90, DT 110 and DT 140 for very soft insolation materials.
For insulation material thicknesses up to 340 mm.
Standard embedment depth for all building materials.

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush installation in all conventional insulation materials
Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels

Building materials

Building material classes A, B, C, D, E
Concrete
Concrete (weather shell)
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Approvals

ETA-14/0372

Functioning

The fixing is pushed through the insulation into the drilled hole and is screwed tight.
For recessed installation, you require the installation tool termoz CS.
Optionally, the installation tool termoz CS can also be used for flush installation by turning the disc.
For recessed installation, the insulation disc is to be covered with a round plug.
When using the installation tool, the installation is completed when the stop disc is flush with the insulation panel.
For lengths from 250 mm the optional supplied bits T 25 are required.

ETA Certification Document

pdf, ETA-14/0372

European Technical Assessment for fischer TermoZ CS 8 and fischer TermoZ CS II 8 - Screwed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete, masonry, lightweight aggregate concrete and autoclaved aerated concrete

Created on 03/26/2021

Load Table

pdf,

TermoZ CS II - Permissible tension loads for a single anchor for multiple use for non-structural applications.

Marketing Documents

pdf,

TermoZ CS II.

System components

ETA-approval
Drill diameter ( d₀ )	8 mm
Max. usable length at surface-flush installation ( t_fix )	170 mm
Max. usable length at countersunk installation ( t_fix )	170 mm
Drive	TX30
Packaging	Folding box
Amount	100 St.
GTIN (EAN-Code)	4048962213652

termoz CS 8

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download