Thermal bridge-free installation in insulation materials.

Insulation fixing FID

The fischer insulation fixing FID is a plug for fixing light fixtures in plastered and non-plastered insulation panels made from polystyrene and polyurethane. The fischer FID is set by hand or using a cordless screwdriver. The special spiral thread taps itself in the insulating board. The fixtures - such as letterboxes, lamps, and motion detectors - can be secured with a 4.5 mm or 6 mm screw.

Varijante proizvoda

Download of image data

Varijante proizvoda

8 Varijanta(e) proizvoda

Anchor length

Wood and chipboard screws

Drive

Max. bolt penetration

Contents

Packaging

Pregledano 8 od 8 varijanti

Advantages

Since the anchor is set exclusively in the insulation itself, fixtures can be installed without thermal bridges.
The geometry of the FID allows for a simple installation in thin layers of plaster, without the need for pre-drilling, thus saving a stage of installation.
The FID 50 is used in thin insulating boards from 50mm. The FID 90 is used in thicker insulating boards, and can bear higher loads.
The bit mounting allows for setting with standard tools, thus allowing for a fast and economic installation.

Applications

To fix lightweight fixtures in plastered and non-plastered insulating boards made of polystyrene and polyurethane.
The areas of application are:

Façade construction (ETICS)
Insulating construction
Electric construction
Refrigerated and climate construction
Acoustic construction

Building materials

Non-plastered, pressure-resistant insulating boards
Plastered, pressure-resistant insulating boards
ETICS insulating boards

Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.

Odobrenja

8C029

Functioning

The FID can be set in the insulating board with a cordless screwdriver or by hand.
For thick layers of plaster a pre-drilling (6 mm) is recommended.
The special spiral thread taps itself in the insulating board.
Water ingress in the insulation can be prevented by sealing the plug collar with a suitable sealant after successful pre-positioned installation.

Installation FID

1 / 4

1
2
3
4

Installation FID Green

1 / 4

1
2
3
4

Komponente sistema

Hammer drill bit Quattric II
74 varijanti

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	—
Packaging	Folding box
Amount	50 St.
GTIN (EAN-Code)	4006209482131

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	4 x FID 50 K
Packaging	Blister card
Amount	4 St.
GTIN (EAN-Code)	4048962059250

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	45 x FID Green 50
Packaging	—
Amount	45 St.
GTIN (EAN-Code)	4048962199758

Anchor length ( l )	50 mm
Wood and chipboard screws ( d_s )	4.5 - 5.0 mm
Drive	TX40
Max. bolt penetration ( l_E,max )	35 mm
Contents	4 x FID Green 50 K
Packaging	Blister card
Amount	4 St.
GTIN (EAN-Code)	4048962218473

Anchor length ( l )	90 mm
Wood and chipboard screws ( d_s )	6.0 mm
Drive	6 mm / 6-kt
Max. bolt penetration ( l_E,max )	80 mm
Contents	—
Packaging	—
Amount	25 St.
GTIN (EAN-Code)	4048962104684

Insulation fixing FID

Varijante proizvoda

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Dokumenti za preuzimanje